Raised toilet seat with armrests

This moulded plastic raised toilet seat with padded armrests allows secure and independent use when getting on and off the toilet. 

It is ideal for individuals with mobility issues and for use after surgery. 
It is easily attached directly to the toilet bowl via adjustable brackets. 

Features

• Ease of Use: Adds raised seat height to your toilet seat, easing the sit-down and stand-up process.
• Available in 5 cm (2") or 10 cm (4") height
• Secure Fit: Firmly attaches to most standard toilets, ensuring stability.
• Padded Armrests: Additional support for balance and safety.
• Simple Installation: Tool-free setup, with no permanent alterations to your toilet.
• Basic armrest assembly required
• Lift the toilet lid and seat and fasten to the toilet bowl
• Universal Design: Suitable for shared bathroom spaces without inconveniencing other users.
• Durable Construction: Built for longevity and consistent performance.
• It can also be used without the armrests

Note:  This raised toilet seat will only fit an oval-shaped toilet bowl.
It will not fit the newer type of toilets with a rectangular shape or with straight sides (full or partial)

Returns of this product are not accepted. See our Delivery & Returns Policy

Specifications

• Maximum recommended user weight:190kg
• Nominal seat height - 2" option: 5cm
• Nominal seat height - 4" option: 10cm 
• Height of arms: 25cm
• Width between arms: 44cm
• Seat Outside Length: 40.64 cm (16 inches)
  Seat Outside Width: 35.56 cm (14 inches)
  
• Seat Oval opening Length: 26.67 cm (10.5 inches)
  Seat Oval opening Width: 25.4 cm (10 inches)

Will fit a standard toilet bowl size of:
All the measurements below are measured against the inside edges of the toilet bowl.
Inside, Lenth measured front to back on the longest side of the oval.
Inside Width measured left to right inside the shorter side of the oval.

• Bowl Inside Length: 26.7 cm (min.) - 33.5 cm (max)*
• Bowl Inside Width: 25.5 cm (min) - 27.5 cm (max)* 

*Note: The bottom of the raised seat is tapered or has a flat edge, allowing the min/max dimensions to fit into different bowls. If the measurements of your toilet are slightly less or more, the seat might still fit. Contact us if you need clarification.

Parts included:

• Check all parts are correct
• 1 x Seat
• 1 x Left armrest
• 1 x Right armrest (long side of the arm at the back of the seat)
• 6 x Screws
• 6 x Curved washers

 Tools required:

• 1 x Phillips screwdriver

TIP: Have an assembly surface that allows for overhanging so you can place the armrest securely. 

• Place the seat upside down on the assembly surface 
• Place armrest in the groove on the seat with the long side of the frame at the back 
• Place curved washers (with wings hugging the armrest frame) and screw into the screw holes (tighten loosely) 
• Repeat for the remaining 2 holes 
• TIP: Start with the hole at the end of the long arm first 
• Repeat for the opposite arm 
• Tighten all screws evenly
• Assembly complete.

Guidance for Use:

To fasten to the toilet seat, loosen the butterfly screws on the 3 mounts, and tighten them to suit the toilet edge size